To ensure proper disinfection of your lenses, you must follow the instructions completely. Do not skip any steps. Always wash, rinse and dry your hands before handling your lenses. This will help prevent eye infections by removing dirt and oils that could get on the lenses.
Never put CLEAR CARE® PLUS on your lenses and insert directly into the eye. Otherwise, burning and stinging will result. If spillage occurs, clean up immediately with a paper towel. Wash, rinse and dry your hands before handling your lenses or touching your eyes.
1. Remove and place each lens into the appropriately marked L/R domed lens holder, and thoroughly rinse with CLEAR CARE® PLUS for 5 seconds.
2. Fill the CLEAR CARE® PLUS lens cup to the fill line with CLEAR CARE® PLUS and place the lens holder in the lens cup. DO NOT UNDERFILL OR OVERFILL.
3. Tighten the cap (finger tight) on the CLEAR CARE® PLUS lens cup and store lenses for at least 6 hours. DO NOT SHAKE THE LENS CASE.
- Store the CLEAR CARE® PLUS lens case upright.
-
Lenses must soak in the provided lens case with CLEAR CARE® PLUS solution for at least 6 hours to allow complete neutralization. Inserting lenses before this time can result in eye irritation or injury
4. After washing, rinsing and drying your hands, remove your lenses from lens holder. If desired or recommended by your eye care professional, rinse lenses before insertion with sterile saline. Your lenses are now ready to wear.
Never put CLEAR CARE® PLUS on your lenses and insert directly into the eye. Otherwise, burning and stinging will result. If spillage occurs, clean up immediately with a paper towel. Wash, rinse and dry your hands before handling your lenses or touching your eyes.
- Do not store below 2°C. Do not store above 30°C.
- Use before the expiration date marked on the product.
- TAMPER EVIDENT: Do not use if package has been opened or damaged.
- Keep out of the reach of children.
- If swallowed, get medical help.
The preservative free, aqueous CLEAR CARE® PLUS contains: hydrogenperoxide 3%, phosphonic acid (stabilizer), sodium chloride (0.79%), phosphate (buffer system), PLURONIC® 17R4† (a cleaning agent), and HydraGlyde® Moisture Matrix (EOBO-21® – polyoxyethylene-polyoxybutylene, especially for silicone hydrogel soft lenses).
